CASTLE EURO Manual de instalación descargar pdf (Pagina 23)

Programming Manual EURO

RINS1291-3 Page: 23

4.7.5 *Access Control/Door Entry Control

*This feature is not available on the EURO 28.

The following programming shows how to set up the Access Control facility if you are using it.

Also the same programming process applies to ‘Door Entry Control’ which allows a tag reader

to control an entry point.

Assign Keypads/Readers

Using the and keys, scroll to

‘ASSIGN KEYPADS/READERS?’

Press the key

Address

Enter the address of the keypad/reader you

wish to assign. Press the  key

Type

Enter : for Reader. Press the  key

Reader Is

Enter : for Access Control

Or Enter : for Entry Control

Press the key

Enter the Lock Open Time (max: 250

seconds). This is the time the door release is

going to be active when a valid tag’s

presented. Press the  key.

Enter the Door Open Time (max: 250

seconds). This is the time the door is allowed

to be open before triggering an alarm. Press

the  key.

Enter the input number to monitor the

chosen door. Please note that this must be

selected for the door monitoring to function.

Entering ‘999’ disables the monitoring for

this door.

To enter a personal name for the access

control (based on its address), press the 

key. Use the text programming to enter this,

see page: 9. Press the  key, you will be

returned to the engineer menu.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Sin comentarios

CASTLE EURO Manual de instalación Pagina 23