CASTLE EURO Manual de instalación Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
EURO Programming Manual
Page: 14 RINS1291-3
ZEM Address
Please select the address for the ZEM you
are installing and press the key.
ZEM Installed?
Enable/Disable the ZEM that you have
installed.
Enter : for NO.
Enter : for YES.
Press the key. Repeat for additional
ZEMs or press the key. You will be
returned to the Engineer Menu.
For information on how to use predictive
text, please see page:9. Enter the location
and press
4.6 Change Inputs
By default, all inputs are pre-set as ‘unused’ so you will need to program each individual input
you require. The input will not be ‘live’ (and hence cannot be walk tested) until you have
exited the Engineer Menu (please see Page: 7)
4.6.1 Input Types
Number & Type Operation
00 Unused Factory default. Input is programmed out of operation.
01 Fire
Active at all times. Audible response: Full (differentiated).
Communicator: ‘Fire’ signal
02 Gas
Active at all times. Audible response: Full (differentiated)
Communicator: ‘Gas’ signal
03 HU
Active at all times. Audible Response: Full (differentiated)
Communicator: ‘Hold Up’ and ‘Input HU’ signals
04 Silent HU
Active at all times. Audible Response: None
Communicator: ‘Hold Up’ and ‘Input HU’ signals
05 Tamper
When unset: Audible Response: Internal only
Communicator: ‘Tamper’ signal. When set: Audible Response: Full
(differentiated). Communicator: ‘Tamper’ and ‘Unconfirmed’ signals
06 Intruder
Active when set. Audible Response: Full
Communicator: ‘Intruder’ and ‘Unconfirmed’ signals
07
Final Exit
(FX)
Active when set – initiates entry timer if system not unset before
entry time expires: Audible Response: Full. Communicator: ‘Intruder’
and ‘Unconfirmed’ signals
08
Entry Route
(ER)
Active when set, except during entry time.
Audible Response: Full. Communicator: ‘Intruder’ and ‘Unconfirmed’
signals
09
ER
(Part FX)
(For use with level sets). When fully set, acts as Entry route input, as
above. When part set, acts as Final Exit input, as above.
10
FX
(Part ER)
(For use with level sets). When fully set, acts as Final Exit input, as
above. When part set, acts as Entry route input, as above.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comentarios a estos manuales

Sin comentarios