CASTLE EURO Manual de instalación descargar pdf (Pagina 20)

EURO Programming Manual

Page: 20 RINS1291-3

Change Inputs

Using the and keys, scroll to

‘CHANGE INPUTS?’. Press the key

Input

Select the input number you wish to

program and press

the  key.

Input Type

Select the shunt input type (type 18)

Shunt Inputs

If you would like to select the shunt inputs

for the selected input press the  key.

Enter the inputs you would like in the shunt

list, after each one press the  key. Each

input selected will scroll on the display on the

bottom line.

If the input you have selected doesn’t

appear, make sure that input is programmed

correctly (Intruder, Tamper, 24Hr or Entry

Route).

Once they have all been entered press the

 key, and press the  key again.

Input Area

Enter the areas/level sets you would like the

input to operate in (To select level setting

instead of areas please refer to Site Options

“Use Level Set”, see page 42). NOTE: The

primary Areas are A, B, C and D. Press the

key. For area setting systems only:

Enter : for Any Enter : for All

(This shows the display of a EURO 76 panel)

Input Attributes

Press the  key to select any attributes for

the input (for details on each attribute see

page: 16)

Repeat the programming for attributes as

described on page: 18

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Sin comentarios

CASTLE EURO Manual de instalación Pagina 20