CASTLE Meridian Especificaciones descargar pdf (Pagina 19)

Started Manual Castle Care-Tech Ltd

5·00 Page 37

PROGRAMMING CODES and

TAGS

Codes may be 4-, 5- or 6-digit (It is

preferable to avoid mixing

different length codes on the

same system), or proximity Tags.

There is an option to only allow

5-digit codes for Grade 3

purposes. The security patterns

valid for each may be

programmed.

CODE TYPES and NUMBERS

Product: User/Manager

Codes

Duress/Guard

Codes

Euro-G2 12 10

MSX-44 50 20

Euro-G3+ 100 20

MSX-134 230 20

MSX-256 500 20

Plus Master Manager and Engineer

codes

IMPORTANT NOTE:

The Engineer can programme

ONLY Engineer, Master

Manager, Duress and Guard

Codes.

Manager and User codes must

be programmed through the

MANAGER menu.

Engineer and Master Manager

Codes cannot be deleted.

Tags programmed as Manager

will not enter Manager Menu

from a Tag reader.

CODE CAPABILITIES

Type Functions

Set and Unset System

only

USER

Default

Also for Access

Control and Ward

Control functions

MANAGER

Set and Unset System

Also access to

Manager menu

functions

Program

by

MANAGER

MASTER

MANAGER

Default

2222

Access to Manager

menu functions only.

Program

by

Manager

OR

Engineer

ENGINEER

Default

1111

Access to all

Engineering

functions, also

set/unset system for

test purposes.

DURESS Unset System,

generating silent

‘

Duress

’

or

‘

Hold Up

’

signal

GUARD

Unset system, but

only after an alarm,

provided alarm has

been active for a

minimum time

(programmable).

Also Set System

An output type is

available to signal

whenever this code

is used.

Program

by

ENGINEER

only.

A site option “Restrict PIN use” is

available so that only TAGs may

be used during entry time.

Castle Care-Tech Ltd Euro-MERiDIAN Getting

Page 38 Software

PROGRAMMING STEPS:

With the display showing

CHANGE CODES?

Press YES

5 digit PINS?

No [0]

Use

B

and

D

keys to select

whether you need to restrict all

Pin-codes to 5 digits (required

for grade 3 installations)

Change Duress

Codes?

Press YES

User Number

[01]

Use number keys to select code

to be changed

Press YES

Enter User Code

[ ]

Use number keys to enter new

code, or present Tag to reader to

programme this.

Display shows [******] if a code

or tag is already allocated: enter

replacement code/tag, or press

C

to delete.

Engineer and Master Mana

g

e

r

Codes cannot be deleted.

Press YES

Code Type

Duress [2]

Use

D

to select between Duress

[2] and Guard Code [3]

User and Manager codes can be

programmed

only from the

Manager menu.

Press YES

UserAreas (Parts)

[ABCD]

Use keys to select Security

Patterns the code is to be valid

for. Whilst this is being done, the

‘

ABCD

’

keys will be illuminated to

reflect the choice made.

Press YES

User Set Options

Unset/Set [0]

Use

D

to select between

Unset/Set [0], Unset only [1], Set

only [2] and None [3]

Press YES

Flexiset

No [0]

Select as required

Press YES

User Name

_

Enter text, as described on

page 23.

Press YES

User Number

[01]

Repeat this procedure for

additional codes, and for

Change Master

Manager Code?

Change Engineer

Code?

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios